# $FreeBSD: src/etc/snmpd.config,v 1.9.10.1.8.1 2012/03/03 06:15:13 kensmith Exp $ # # Example configuration file for bsnmpd(1). # # # Set some common variables # location := "Room 200" contact := "sysmeister@example.com" system := 1 # FreeBSD traphost := localhost trapport := 162 # Change this! read := "public" # Uncomment begemotSnmpdCommunityString.0.2 below that sets the community # string to enable write access. write := "geheim" trap := "mytrap" # # Configuration # %snmpd begemotSnmpdDebugDumpPdus = 2 begemotSnmpdDebugSyslogPri = 7 # # Set the read and write communities. # # The default value of the community strings is NULL (note, that this is # different from the empty string). This disables both read and write access. # To enable read access only the read community string must be set. Setting # the write community string enables both read and write access with that # string. # # Be sure to understand the security implications of SNMPv2 - the community # strings are readable on the wire! # begemotSnmpdCommunityString.0.1 = $(read) # begemotSnmpdCommunityString.0.2 = $(write) begemotSnmpdCommunityDisable = 1 # open standard SNMP ports begemotSnmpdPortStatus.0.0.0.0.161 = 1 # open a unix domain socket begemotSnmpdLocalPortStatus."/var/run/snmpd.sock" = 1 begemotSnmpdLocalPortType."/var/run/snmpd.sock" = 4 # send traps to the traphost begemotTrapSinkStatus.[$(traphost)].$(trapport) = 4 begemotTrapSinkVersion.[$(traphost)].$(trapport) = 2 begemotTrapSinkComm.[$(traphost)].$(trapport) = $(trap) sysContact = $(contact) sysLocation = $(location) sysObjectId = 1.3.6.1.4.1.12325.1.1.2.1.$(system) snmpEnableAuthenTraps = 2 # # Load MIB-2 module # begemotSnmpdModulePath."mibII" = "/usr/lib/libsnmp_mibII.so.3.0" # Force a polling rate for the 64-bit interface counters in case # the automatic computation is wrong (which may be the case if an interface # announces the wrong bit rate via its MIB). #%mibII #begemotIfForcePoll = 2000 # # Netgraph module # #begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so" # #%netgraph #begemotNgControlNodeName = "snmpd" # # pf(4) module # #begemotSnmpdModulePath."pf" = "/usr/lib/snmp_pf.so" # # Host resources module # This requires the mibII module. # #begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so" # # Bridge module # This requires the mibII module. # #begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"