# Copyright 1999-2025 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

EAPI=8

MODULES_OPTIONAL_IUSE=+modules
inherit desktop dot-a eapi9-pipestatus flag-o-matic linux-mod-r1
inherit readme.gentoo-r1 systemd toolchain-funcs unpacker user-info

MODULES_KERNEL_MAX=6.15
NV_URI="https://download.nvidia.com/XFree86/"

DESCRIPTION="NVIDIA Accelerated Graphics Driver"
HOMEPAGE="https://www.nvidia.com/"
SRC_URI="
	amd64? ( ${NV_URI}Linux-x86_64/${PV}/NVIDIA-Linux-x86_64-${PV}.run )
	arm64? ( ${NV_URI}Linux-aarch64/${PV}/NVIDIA-Linux-aarch64-${PV}.run )
	$(printf "${NV_URI}%s/%s-${PV}.tar.bz2 " \
		nvidia-{installer,modprobe,persistenced,settings,xconfig}{,})
	${NV_URI}NVIDIA-kernel-module-source/NVIDIA-kernel-module-source-${PV}.tar.xz
"
# nvidia-installer is unused but here for GPL-2's "distribute sources"
S=${WORKDIR}

LICENSE="NVIDIA-2023 Apache-2.0 BSD BSD-2 GPL-2 MIT ZLIB curl openssl"
SLOT="0/${PV%%.*}"
KEYWORDS="-* amd64 ~arm64"
# TODO: enable kernel-open by default to match nvidia upstream, but should
# first setup a supported-gpus.json "kernelopen" check to abort and avoid bad
# surprises (should abort for legacy cards too, and have a bypass variable)
IUSE="+X abi_x86_32 abi_x86_64 kernel-open persistenced powerd +static-libs +tools wayland"
REQUIRED_USE="kernel-open? ( modules )"

COMMON_DEPEND="
	acct-group/video
	X? ( x11-libs/libpciaccess )
	persistenced? (
		acct-user/nvpd
		net-libs/libtirpc:=
	)
	tools? (
		>=app-accessibility/at-spi2-core-2.46:2
		dev-libs/glib:2
		dev-libs/jansson:=
		media-libs/harfbuzz:=
		x11-libs/cairo
		x11-libs/gdk-pixbuf:2
		x11-libs/gtk+:3[X]
		x11-libs/libX11
		x11-libs/libXext
		x11-libs/libXxf86vm
		x11-libs/pango
	)
"
RDEPEND="
	${COMMON_DEPEND}
	dev-libs/openssl:0/3
	sys-libs/glibc
	X? (
		media-libs/libglvnd[X,abi_x86_32(-)?]
		x11-libs/libX11[abi_x86_32(-)?]
		x11-libs/libXext[abi_x86_32(-)?]
	)
	powerd? ( sys-apps/dbus[abi_x86_32(-)?] )
	wayland? (
		>=gui-libs/egl-gbm-1.1.1-r2[abi_x86_32(-)?]
		>=gui-libs/egl-wayland-1.1.13.1[abi_x86_32(-)?]
		X? ( gui-libs/egl-x11[abi_x86_32(-)?] )
	)
"
DEPEND="
	${COMMON_DEPEND}
	static-libs? (
		x11-base/xorg-proto
		x11-libs/libX11
		x11-libs/libXext
	)
	tools? (
		dev-util/vulkan-headers
		media-libs/libglvnd
		sys-apps/dbus
		x11-base/xorg-proto
		x11-libs/libXrandr
		x11-libs/libXv
		x11-libs/libvdpau
	)
"
BDEPEND="
	sys-devel/m4
	virtual/pkgconfig
"

# there is some non-prebuilt exceptions but rather not maintain a list
QA_PREBUILT="lib/firmware/* usr/bin/* usr/lib*"

PATCHES=(
	"${FILESDIR}"/nvidia-modprobe-390.141-uvm-perms.patch
	"${FILESDIR}"/nvidia-settings-530.30.02-desktop.patch
	"${FILESDIR}"/nvidia-drivers-570.153.02-kernel-6.15.patch
)

pkg_setup() {
	use modules && [[ ${MERGE_TYPE} != binary ]] || return

	# do early before linux-mod-r1 so can use chkconfig to setup CONFIG_CHECK
	get_version
	require_configured_kernel

	local CONFIG_CHECK="
		PROC_FS
		~DRM_KMS_HELPER
		~DRM_FBDEV_EMULATION
		~SYSVIPC
		~!LOCKDEP
		~!PREEMPT_RT
		~!SLUB_DEBUG_ON
		!DEBUG_MUTEXES
		$(usev powerd '~CPU_FREQ')
	"

	kernel_is -ge 6 11 && linux_chkconfig_present DRM_FBDEV_EMULATION &&
		CONFIG_CHECK+=" DRM_TTM_HELPER"

	use amd64 && kernel_is -ge 5 8 && CONFIG_CHECK+=" X86_PAT" #817764

	use kernel-open && CONFIG_CHECK+=" MMU_NOTIFIER" #843827

	local drm_helper_msg="Cannot be directly selected in the kernel's config menus, and may need
	selection of a DRM device even if unused, e.g. CONFIG_DRM_QXL=m or
	DRM_AMDGPU=m (among others, consult the kernel config's help), can
	also use DRM_NOUVEAU=m as long as built as module *not* built-in."
	local ERROR_DRM_KMS_HELPER="CONFIG_DRM_KMS_HELPER: is not set but needed for Xorg auto-detection
	of drivers (no custom config), and for wayland / nvidia-drm.modeset=1.
	${drm_helper_msg}"
	local ERROR_DRM_TTM_HELPER="CONFIG_DRM_TTM_HELPER: is not set but is needed to compile when using
	kernel version 6.11.x or newer while DRM_FBDEV_EMULATION is set.
	${drm_helper_msg}"
	local ERROR_DRM_FBDEV_EMULATION="CONFIG_DRM_FBDEV_EMULATION: is not set but is needed for
	nvidia-drm.fbdev=1 support, currently off-by-default and it could
	be ignored, but note that is due to change in the future."
	local ERROR_MMU_NOTIFIER="CONFIG_MMU_NOTIFIER: is not set but needed to build with USE=kernel-open.
	Cannot be directly selected in the kernel's menuconfig, and may need
	selection of another option that requires it such as CONFIG_KVM."
	local ERROR_PREEMPT_RT="CONFIG_PREEMPT_RT: is set but is unsupported by NVIDIA upstream and
	will fail to build unless the env var IGNORE_PREEMPT_RT_PRESENCE=1 is
	set. Please do not report issues if run into e.g. kernel panics while
	ignoring this."

	linux-mod-r1_pkg_setup
}

src_prepare() {
	# make patches usable across versions
	rm nvidia-modprobe && mv nvidia-modprobe{-${PV},} || die
	rm nvidia-persistenced && mv nvidia-persistenced{-${PV},} || die
	rm nvidia-settings && mv nvidia-settings{-${PV},} || die
	rm nvidia-xconfig && mv nvidia-xconfig{-${PV},} || die
	mv NVIDIA-kernel-module-source-${PV} kernel-module-source || die

	default

	# prevent detection of incomplete kernel DRM support (bug #603818)
	sed 's/defined(CONFIG_DRM/defined(CONFIG_DRM_KMS_HELPER/g' \
		-i kernel{,-module-source/kernel-open}/conftest.sh || die

	sed 's/__USER__/nvpd/' \
		nvidia-persistenced/init/systemd/nvidia-persistenced.service.template \
		> "${T}"/nvidia-persistenced.service || die

	# use alternative vulkan icd option if USE=-X (bug #909181)
	use X || sed -i 's/"libGLX/"libEGL/' nvidia_{layers,icd}.json || die

	# enable nvidia-drm.modeset=1 by default with USE=wayland
	cp "${FILESDIR}"/nvidia-570.conf "${T}"/nvidia.conf || die
	use !wayland || sed -i '/^#.*modeset=1$/s/^#//' "${T}"/nvidia.conf || die

	# makefile attempts to install wayland library even if not built
	use wayland || sed -i 's/ WAYLAND_LIB_install$//' \
		nvidia-settings/src/Makefile || die
}

src_compile() {
	tc-export AR CC CXX LD OBJCOPY OBJDUMP PKG_CONFIG

	# extra flags for the libXNVCtrl.a static library
	local xnvflags=-fPIC #840389
	tc-is-lto && xnvflags+=" $(test-flags-CC -ffat-lto-objects)"

	NV_ARGS=(
		PREFIX="${EPREFIX}"/usr
		HOST_CC="$(tc-getBUILD_CC)"
		HOST_LD="$(tc-getBUILD_LD)"
		BUILD_GTK2LIB=
		NV_USE_BUNDLED_LIBJANSSON=0
		NV_VERBOSE=1 DO_STRIP= MANPAGE_GZIP= OUTPUTDIR=out
		WAYLAND_AVAILABLE=$(usex wayland 1 0)
		XNVCTRL_CFLAGS="${xnvflags}"
	)

	if use modules; then
		local o_cflags=${CFLAGS} o_cxxflags=${CXXFLAGS} o_ldflags=${LDFLAGS}

		local modlistargs=video:kernel
		if use kernel-open; then
			modlistargs+=-module-source:kernel-module-source/kernel-open

			# environment flags are normally unused for modules, but nvidia
			# uses it for building the "blob" and it is a bit fragile
			filter-flags -fno-plt #912949
			filter-lto
			CC=${KERNEL_CC} CXX=${KERNEL_CXX} strip-unsupported-flags

			LDFLAGS=$(raw-ldflags)
		fi

		local modlist=( nvidia{,-drm,-modeset,-peermem,-uvm}=${modlistargs} )
		local modargs=(
			IGNORE_CC_MISMATCH=yes NV_VERBOSE=1
			SYSOUT="${KV_OUT_DIR}" SYSSRC="${KV_DIR}"

			# kernel takes "x86" and "x86_64" as meaning the same, but nvidia
			# makes the distinction (since 550.135) and is not happy with "x86"
			# TODO?: it should be ok/better for tc-arch-kernel to do x86_64
			$(usev amd64 ARCH=x86_64)
		)

		# temporary workaround for bug #914468
		addpredict "${KV_OUT_DIR}"

		linux-mod-r1_src_compile
		CFLAGS=${o_cflags} CXXFLAGS=${o_cxxflags} LDFLAGS=${o_ldflags}
	fi

	emake "${NV_ARGS[@]}" -C nvidia-modprobe
	use persistenced && emake "${NV_ARGS[@]}" -C nvidia-persistenced
	use X && emake "${NV_ARGS[@]}" -C nvidia-xconfig

	if use tools; then
		# avoid noisy *very* noisy logs with deprecation warnings
		CFLAGS="-Wno-deprecated-declarations ${CFLAGS}" \
			emake "${NV_ARGS[@]}" -C nvidia-settings
	elif use static-libs; then
		# pretend GTK+3 is available, not actually used (bug #880879)
		emake "${NV_ARGS[@]}" BUILD_GTK3LIB=1 \
			-C nvidia-settings/src out/libXNVCtrl.a
	fi
}

src_install() {
	local libdir=$(get_libdir) libdir32=$(ABI=x86 get_libdir)

	NV_ARGS+=( DESTDIR="${D}" LIBDIR="${ED}"/usr/${libdir} )

	local -A paths=(
		[APPLICATION_PROFILE]=/usr/share/nvidia
		[CUDA_ICD]=/etc/OpenCL/vendors
		[EGL_EXTERNAL_PLATFORM_JSON]=/usr/share/egl/egl_external_platform.d
		[FIRMWARE]=/lib/firmware/nvidia/${PV}
		[GBM_BACKEND_LIB_SYMLINK]=/usr/${libdir}/gbm
		[GLVND_EGL_ICD_JSON]=/usr/share/glvnd/egl_vendor.d
		[OPENGL_DATA]=/usr/share/nvidia
		[VULKANSC_ICD_JSON]=/usr/share/vulkansc
		[VULKAN_ICD_JSON]=/usr/share/vulkan
		[WINE_LIB]=/usr/${libdir}/nvidia/wine
		[XORG_OUTPUTCLASS_CONFIG]=/usr/share/X11/xorg.conf.d

		[GLX_MODULE_SHARED_LIB]=/usr/${libdir}/xorg/modules/extensions
		[GLX_MODULE_SYMLINK]=/usr/${libdir}/xorg/modules
		[XMODULE_SHARED_LIB]=/usr/${libdir}/xorg/modules
	)

	local skip_files=(
		$(usev !X "libGLX_nvidia libglxserver_nvidia")
		libGLX_indirect # non-glvnd unused fallback
		libnvidia-{gtk,wayland-client} nvidia-{settings,xconfig} # from source
		libnvidia-egl-gbm 15_nvidia_gbm # gui-libs/egl-gbm
		libnvidia-egl-wayland 10_nvidia_wayland # gui-libs/egl-wayland
		libnvidia-egl-xcb 20_nvidia_xcb.json # gui-libs/egl-x11
		libnvidia-egl-xlib 20_nvidia_xlib.json # gui-libs/egl-x11
		libnvidia-pkcs11.so # using the openssl3 version instead
	)
	local skip_modules=(
		$(usev !X "nvfbc vdpau xdriver")
		$(usev !modules gsp)
		$(usev !powerd powerd)
		installer nvpd # handled separately / built from source
	)
	local skip_types=(
		GLVND_LIB GLVND_SYMLINK EGL_CLIENT.\* GLX_CLIENT.\* # media-libs/libglvnd
		OPENCL_WRAPPER.\* # virtual/opencl
		DOCUMENTATION DOT_DESKTOP .\*_SRC DKMS_CONF SYSTEMD_UNIT # handled separately / unused
	)

	local DOCS=(
		README.txt NVIDIA_Changelog supported-gpus/supported-gpus.json
		nvidia-settings/doc/{FRAMELOCK,NV-CONTROL-API}.txt
	)
	local HTML_DOCS=( html/. )
	einstalldocs

	local DISABLE_AUTOFORMATTING=yes
	local DOC_CONTENTS="\
Trusted users should be in the 'video' group to use NVIDIA devices.
You can add yourself by using: gpasswd -a my-user video\
$(usev modules "

Like all out-of-tree kernel modules, it is necessary to rebuild
${PN} after upgrading or rebuilding the Linux kernel
by for example running \`emerge @module-rebuild\`. Alternatively,
if using a distribution kernel (sys-kernel/gentoo-kernel{,-bin}),
this can be automated by setting USE=dist-kernel globally.

Loaded kernel modules also must not mismatch with the installed
${PN} version (excluding -r revision), meaning should
ensure \`eselect kernel list\` points to the kernel that will be
booted before building and preferably reboot after upgrading
${PN} (the ebuild will emit a warning if mismatching).

See '${EPREFIX}/etc/modprobe.d/nvidia.conf' for modules options.")\
$(use amd64 && usev !abi_x86_32 "

Note that without USE=abi_x86_32 on ${PN}, 32bit applications
(typically using wine / steam) will not be able to use GPU acceleration.")

Be warned that USE=kernel-open may need to be either enabled or
disabled for certain cards to function:
- GTX 50xx (blackwell) and higher require it to be enabled
- GTX 1650 and higher (pre-blackwell) should work either way
- Older cards require it to be disabled

For additional information or for troubleshooting issues, please see
https://wiki.gentoo.org/wiki/NVIDIA/nvidia-drivers and NVIDIA's own
documentation that is installed alongside this README."
	readme.gentoo_create_doc

	if use modules; then
		linux-mod-r1_src_install

		insinto /etc/modprobe.d
		doins "${T}"/nvidia.conf

		# used for gpu verification with binpkgs (not kept, see pkg_preinst)
		insinto /usr/share/nvidia
		doins supported-gpus/supported-gpus.json
	fi

	emake "${NV_ARGS[@]}" -C nvidia-modprobe install
	fowners :video /usr/bin/nvidia-modprobe #505092
	fperms 4710 /usr/bin/nvidia-modprobe

	if use persistenced; then
		emake "${NV_ARGS[@]}" -C nvidia-persistenced install
		newconfd "${FILESDIR}"/nvidia-persistenced.confd nvidia-persistenced
		newinitd "${FILESDIR}"/nvidia-persistenced.initd nvidia-persistenced
		systemd_dounit "${T}"/nvidia-persistenced.service
	fi

	if use tools; then
		emake "${NV_ARGS[@]}" -C nvidia-settings install

		doicon nvidia-settings/doc/nvidia-settings.png
		domenu nvidia-settings/doc/nvidia-settings.desktop

		exeinto /etc/X11/xinit/xinitrc.d
		newexe "${FILESDIR}"/95-nvidia-settings-r1 95-nvidia-settings
	fi

	if use static-libs; then
		dolib.a nvidia-settings/src/out/libXNVCtrl.a
		strip-lto-bytecode

		insinto /usr/include/NVCtrl
		doins nvidia-settings/src/libXNVCtrl/NVCtrl{Lib,}.h
	fi

	use X && emake "${NV_ARGS[@]}" -C nvidia-xconfig install

	# mimic nvidia-installer by reading .manifest to install files
	# 0:file 1:perms 2:type 3+:subtype/arguments -:module
	local m into
	while IFS=' ' read -ra m; do
		! [[ ${#m[@]} -ge 2 && ${m[-1]} =~ MODULE: ]] ||
			[[ " ${m[0]##*/}" =~ ^(\ ${skip_files[*]/%/.*|\\} )$ ]] ||
			[[ " ${m[2]}" =~ ^(\ ${skip_types[*]/%/|\\} )$ ]] ||
			has ${m[-1]#MODULE:} "${skip_modules[@]}" && continue

		case ${m[2]} in
			MANPAGE)
				gzip -dc ${m[0]} | newman - ${m[0]%.gz}
				pipestatus || die
				continue
			;;
			GBM_BACKEND_LIB_SYMLINK) m[4]=../${m[4]};; # missing ../
			VDPAU_SYMLINK) m[4]=vdpau/; m[5]=${m[5]#vdpau/};; # .so to vdpau/
		esac

		if [[ -v 'paths[${m[2]}]' ]]; then
			into=${paths[${m[2]}]}
		elif [[ ${m[2]} == EXPLICIT_PATH ]]; then
			into=${m[3]}
		elif [[ ${m[2]} == *_BINARY ]]; then
			into=/usr/bin
		elif [[ ${m[3]} == COMPAT32 ]]; then
			use abi_x86_32 || continue
			into=/usr/${libdir32}
		elif [[ ${m[2]} == *_@(LIB|SYMLINK) ]]; then
			into=/usr/${libdir}
		else
			die "No known installation path for ${m[0]}"
		fi
		[[ ${m[3]: -2} == ?/ ]] && into+=/${m[3]%/}
		[[ ${m[4]: -2} == ?/ ]] && into+=/${m[4]%/}

		if [[ ${m[2]} =~ _SYMLINK$ ]]; then
			[[ ${m[4]: -1} == / ]] && m[4]=${m[5]}
			dosym ${m[4]} ${into}/${m[0]}
			continue
		fi
		# avoid portage warning due to missing soname links in manifest
		[[ ${m[0]} =~ ^libnvidia-ngx.so ]] &&
			dosym ${m[0]} ${into}/${m[0]%.so*}.so.1

		printf -v m[1] %o $((m[1] | 0200)) # 444->644
		insopts -m${m[1]}
		insinto ${into}
		doins ${m[0]}
	done < .manifest || die
	insopts -m0644 # reset

	# MODULE:installer non-skipped extras
	: "$(systemd_get_sleepdir)"
	exeinto "${_#"${EPREFIX}"}"
	doexe systemd/system-sleep/nvidia
	dobin systemd/nvidia-sleep.sh
	systemd_dounit systemd/system/nvidia-{hibernate,resume,suspend,suspend-then-hibernate}.service

	dobin nvidia-bug-report.sh

	insinto /usr/share/nvidia/files.d
	doins sandboxutils-filelist.json

	# MODULE:powerd extras
	if use powerd; then
		newinitd "${FILESDIR}"/nvidia-powerd.initd nvidia-powerd #923117
		systemd_dounit systemd/system/nvidia-powerd.service

		insinto /usr/share/dbus-1/system.d
		doins nvidia-dbus.conf
	fi

	# enabling is needed for sleep to work properly and little reason not to do
	# it unconditionally for a better user experience
	: "$(systemd_get_systemunitdir)"
	local unitdir=${_#"${EPREFIX}"}
	# not using relative symlinks to match systemd's own links
	dosym {"${unitdir}",/etc/systemd/system/systemd-hibernate.service.wants}/nvidia-hibernate.service
	dosym {"${unitdir}",/etc/systemd/system/systemd-hibernate.service.wants}/nvidia-resume.service
	dosym {"${unitdir}",/etc/systemd/system/systemd-suspend.service.wants}/nvidia-suspend.service
	dosym {"${unitdir}",/etc/systemd/system/systemd-suspend.service.wants}/nvidia-resume.service
	dosym {"${unitdir}",/etc/systemd/system/systemd-suspend-then-hibernate.service.wants}/nvidia-suspend-then-hibernate.service
	dosym {"${unitdir}",/etc/systemd/system/systemd-suspend-then-hibernate.service.wants}/nvidia-resume.service
	# also add a custom elogind hook to do the equivalent of the above
	exeinto /usr/lib/elogind/system-sleep
	newexe "${FILESDIR}"/system-sleep.elogind nvidia
	# <elogind-255.5 used a different path (bug #939216), keep a compat symlink
	# TODO: cleanup after 255.5 been stable for a few months
	dosym {/usr/lib,/"${libdir}"}/elogind/system-sleep/nvidia

	# needed with >=systemd-256 or may fail to resume with some setups
	# https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1072722
	insinto "${unitdir}"/systemd-homed.service.d
	newins - 10-nvidia.conf <<-EOF
		[Service]
		Environment=SYSTEMD_HOME_LOCK_FREEZE_SESSION=false
	EOF
	insinto "${unitdir}"/systemd-suspend.service.d
	newins - 10-nvidia.conf <<-EOF
		[Service]
		Environment=SYSTEMD_SLEEP_FREEZE_USER_SESSIONS=false
	EOF
	dosym -r "${unitdir}"/systemd-{suspend,hibernate}.service.d/10-nvidia.conf
	dosym -r "${unitdir}"/systemd-{suspend,hybrid-sleep}.service.d/10-nvidia.conf
	dosym -r "${unitdir}"/systemd-{suspend,suspend-then-hibernate}.service.d/10-nvidia.conf

	# symlink non-versioned so nvidia-settings can use it even if misdetected
	dosym nvidia-application-profiles-${PV}-key-documentation \
		${paths[APPLICATION_PROFILE]}/nvidia-application-profiles-key-documentation

	# don't attempt to strip firmware files (silences errors)
	dostrip -x ${paths[FIRMWARE]}

	# sandbox issues with /dev/nvidiactl and others (bug #904292,#921578)
	# are widespread and sometime affect revdeps of packages built with
	# USE=opencl/cuda making it hard to manage in ebuilds (minimal set,
	# ebuilds should handle manually if need others or addwrite)
	insinto /etc/sandbox.d
	newins - 20nvidia <<<'SANDBOX_PREDICT="/dev/nvidiactl:/dev/nvidia-caps:/dev/char"'

	# dracut does not use /etc/modprobe.d if hostonly=no, but want to make sure
	# our settings are used for bug 932781#c8 and nouveau blacklist if either
	# modules are included (however, just best-effort without initramfs regen)
	if use modules; then
		echo "install_items+=\" ${EPREFIX}/etc/modprobe.d/nvidia.conf \"" >> \
			"${ED}"/usr/lib/dracut/dracut.conf.d/10-${PN}.conf || die
	fi
}

pkg_preinst() {
	has_version "${CATEGORY}/${PN}[kernel-open]" && NV_HAD_KERNEL_OPEN=
	has_version "${CATEGORY}/${PN}[wayland]" && NV_HAD_WAYLAND=

	use modules || return

	# set video group id based on live system (bug #491414)
	local g=$(egetent group video | cut -d: -f3)
	[[ ${g} =~ ^[0-9]+$ ]] || die "Failed to determine video group id (got '${g}')"
	sed -i "s/@VIDEOGID@/${g}/" "${ED}"/etc/modprobe.d/nvidia.conf || die

	# try to find driver mismatches using temporary supported-gpus.json
	for g in $(grep -l 0x10de /sys/bus/pci/devices/*/vendor 2>/dev/null); do
		g=$(grep -io "\"devid\":\"$(<${g%vendor}device)\"[^}]*branch\":\"[0-9]*" \
			"${ED}"/usr/share/nvidia/supported-gpus.json 2>/dev/null)
		if [[ ${g} ]]; then
			g=$((${g##*\"}+1))
			if ver_test -ge ${g}; then
				NV_LEGACY_MASK=">=${CATEGORY}/${PN}-${g}"
				break
			fi
		fi
	done
	rm "${ED}"/usr/share/nvidia/supported-gpus.json || die
}

pkg_postinst() {
	linux-mod-r1_pkg_postinst

	readme.gentoo_print_elog

	if [[ -r /proc/driver/nvidia/version &&
		$(</proc/driver/nvidia/version) != *"  ${PV}  "* ]]; then
		ewarn "Currently loaded NVIDIA modules do not match the newly installed"
		ewarn "libraries and may prevent launching GPU-accelerated applications."
		if use modules; then
			ewarn "Easiest way to fix this is normally to reboot. If still run into issues"
			ewarn "(e.g. API mismatch messages in the \`dmesg\` output), please verify"
			ewarn "that the running kernel is ${KV_FULL} and that (if used) the"
			ewarn "initramfs does not include NVIDIA modules (or at least, not old ones)."
		fi
	fi

	if [[ $(</proc/cmdline) == *slub_debug=[!-]* ]]; then
		ewarn "Detected that the current kernel command line is using 'slub_debug=',"
		ewarn "this may lead to system instability/freezes with this version of"
		ewarn "${PN}. Bug: https://bugs.gentoo.org/796329"
	fi

	if [[ -v NV_LEGACY_MASK ]]; then
		ewarn
		ewarn "***WARNING***"
		ewarn
		ewarn "You are installing a version of ${PN} known not to work"
		ewarn "with a GPU of the current system. If unwanted, add the mask:"
		if [[ -d ${EROOT}/etc/portage/package.mask ]]; then
			ewarn "  echo '${NV_LEGACY_MASK}' > ${EROOT}/etc/portage/package.mask/${PN}"
		else
			ewarn "  echo '${NV_LEGACY_MASK}' >> ${EROOT}/etc/portage/package.mask"
		fi
		ewarn "...then downgrade to a legacy[1] branch if possible (not all old versions"
		ewarn "are available or fully functional, may need to consider nouveau[2])."
		ewarn "[1] https://www.nvidia.com/object/IO_32667.html"
		ewarn "[2] https://wiki.gentoo.org/wiki/Nouveau"
	fi

	if use kernel-open && [[ ! -v NV_HAD_KERNEL_OPEN ]]; then
		ewarn
		ewarn "Open source variant of ${PN} was selected, note that it requires"
		ewarn "Turing/Ampere+ GPUs (aka GTX 1650+). Try disabling if run into issues."
		ewarn "Also see: ${EROOT}/usr/share/doc/${PF}/html/kernel_open.html"
	fi

	if use wayland && use modules && [[ ! -v NV_HAD_WAYLAND ]]; then
		elog
		elog "Note that with USE=wayland, nvidia-drm.modeset=1 will be enabled"
		elog "in '${EROOT}/etc/modprobe.d/nvidia.conf'. *If* experience issues,"
		elog "either disable wayland or edit nvidia.conf."
	fi
}