# Copyright 1999-2024 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

EAPI=8

# TODO: Add PyPy once officially supported. See also:
#     https://bugreports.qt.io/browse/PYSIDE-535
PYTHON_COMPAT=( python3_{10..11} )

LLVM_COMPAT=( 15 )

inherit cmake llvm-r1 python-r1 virtualx

# TODO: Add conditional support for "QtRemoteObjects" via a new "remoteobjects"
# USE flag after an external "dev-qt/qtremoteobjects" package has been created.
# TODO: Add conditional support for apidoc generation via a new "doc" USE flag.
# Note that doing so requires the Qt source tree, sphinx, and graphviz. Once
# ready, pass the ${QT_SRC_DIR} variable to cmake to enable this support.
# TODO: Disable GLES support if the "gles2-only" USE flag is disabled. Note
# that the "PySide2/QtGui/CMakeLists.txt" and
# "PySide2/QtOpenGLFunctions/CMakeLists.txt" files test for GLES support by
# testing whether the "Qt5::Gui" list property defined by
# "/usr/lib64/cmake/Qt5Gui/Qt5GuiConfig.cmake" at "dev-qt/qtgui" installation
# time contains the substring "opengles2". Since cmake does not permit
# properties to be overridden from the command line, these files must instead
# be conditionally patched to avoid these tests. An issue should be filed with
# upstream requesting a CLI-settable variable to control this.

MY_P=pyside-setup-opensource-src-${PV}

DESCRIPTION="Python bindings for the Qt framework"
HOMEPAGE="https://wiki.qt.io/PySide2"
SRC_URI="https://download.qt.io/official_releases/QtForPython/pyside2/PySide2-${PV}-src/${MY_P}.tar.xz"
S="${WORKDIR}/${MY_P}/sources/pyside2"

# See "sources/pyside2/PySide2/licensecomment.txt" for licensing details.
# Shall we allow essential modules to be disabled? They are:
# (core), gui, widgets, printsupport, sql, network, testlib, concurrent,
# x11extras (for X)
LICENSE="|| ( GPL-2 GPL-3+ LGPL-3 )"
SLOT="0"
KEYWORDS="amd64 ~arm arm64 ~ppc64 ~riscv x86"
IUSE="
	3d charts +concurrent datavis designer gles2-only +gui help location
	multimedia +network positioning +printsupport qml quick
	scxml sensors speech +sql svg test +testlib webchannel webengine websockets
	+widgets +x11extras xml xmlpatterns
"

# Manually reextract these requirements on version bumps by running the
# following one-liners from within "${S}":
#     $ grep 'set.*_deps' PySide2/Qt*/CMakeLists.txt
#     $ cat /lib64/cmake/Qt5*/Qt5*.cmake | grep -i DEPENDENCIES
# Note that the "designer" USE flag corresponds to the "Qt5UiTools" module.
REQUIRED_USE="${PYTHON_REQUIRED_USE}
	3d? ( gui network )
	charts? ( gui widgets )
	datavis? ( gui )
	designer? ( gui widgets xml )
	gles2-only? ( gui )
	help? ( gui sql widgets )
	location? ( gui network positioning quick )
	multimedia? ( gui network widgets )
	printsupport? ( gui widgets )
	qml? ( gui network )
	quick? ( gui network qml widgets network )
	speech? ( multimedia )
	sql? ( widgets )
	svg? ( widgets )
	testlib? ( widgets )
	webchannel? ( qml )
	webengine? (
		gui network positioning quick qml
		widgets? ( printsupport network webchannel )
	)
	websockets? ( network )
	widgets? ( gui )
	x11extras? ( gui )
"

# Tests fail pretty bad and I'm not fixing them right now
RESTRICT="test"

# Minimal supported version of Qt.
QT_PV="$(ver_cut 1-3)*:5"

RDEPEND="${PYTHON_DEPS}
	~dev-python/shiboken2-${PV}[${PYTHON_USEDEP},${LLVM_USEDEP}]
	=dev-qt/qtcore-${QT_PV}
	=dev-qt/qtopengl-${QT_PV}[gles2-only=]
	=dev-qt/qtserialport-${QT_PV}
	3d? ( =dev-qt/qt3d-${QT_PV}[qml?,gles2-only=] )
	charts? ( =dev-qt/qtcharts-${QT_PV}[qml?] )
	concurrent? ( =dev-qt/qtconcurrent-${QT_PV} )
	datavis? ( =dev-qt/qtdatavis3d-${QT_PV}[qml?,gles2-only=] )
	designer? ( =dev-qt/designer-${QT_PV} )
	gui? ( =dev-qt/qtgui-${QT_PV}[jpeg,gles2-only=] )
	help? ( =dev-qt/qthelp-${QT_PV} )
	location? ( =dev-qt/qtlocation-${QT_PV} )
	multimedia? ( =dev-qt/qtmultimedia-${QT_PV}[qml?,gles2-only=,widgets?] )
	network? ( =dev-qt/qtnetwork-${QT_PV} )
	positioning? ( =dev-qt/qtpositioning-${QT_PV}[qml?] )
	printsupport? ( =dev-qt/qtprintsupport-${QT_PV}[gles2-only=] )
	qml? ( =dev-qt/qtdeclarative-${QT_PV}[widgets?] )
	quick? (
		=dev-qt/qtdeclarative-${QT_PV}[widgets?]
		=dev-qt/qtquickcontrols2-${QT_PV}[widgets?]
	)
	scxml? ( =dev-qt/qtscxml-${QT_PV} )
	sensors? ( =dev-qt/qtsensors-${QT_PV}[qml?] )
	speech? ( =dev-qt/qtspeech-${QT_PV} )
	sql? ( =dev-qt/qtsql-${QT_PV} )
	svg? ( =dev-qt/qtsvg-${QT_PV} )
	testlib? ( =dev-qt/qttest-${QT_PV} )
	webchannel? ( =dev-qt/qtwebchannel-${QT_PV}[qml] )
	webengine? ( || (
		=dev-qt/qtwebengine-${QT_PV}[alsa,widgets?]
		=dev-qt/qtwebengine-${QT_PV}[pulseaudio,widgets?]
		)
	)
	websockets? ( =dev-qt/qtwebsockets-${QT_PV}[qml?] )
	widgets? ( =dev-qt/qtwidgets-${QT_PV}[gles2-only=] )
	x11extras? ( =dev-qt/qtx11extras-${QT_PV} )
	xml? ( =dev-qt/qtxml-${QT_PV} )
	xmlpatterns? ( =dev-qt/qtxmlpatterns-${QT_PV}[qml?] )
"
DEPEND="${RDEPEND}
	$(llvm_gen_dep '
		sys-devel/clang:${LLVM_SLOT}
		sys-devel/llvm:${LLVM_SLOT}
	')
	test? ( x11-misc/xvfb-run )
"

src_configure() {
	# See COLLECT_MODULE_IF_FOUND macros in CMakeLists.txt
	local mycmakeargs=(
		-DBUILD_TESTS=$(usex test)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt53DAnimation=$(usex !3d)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt53DCore=$(usex !3d)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt53DExtras=$(usex !3d)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt53DInput=$(usex !3d)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt53DLogic=$(usex !3d)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt53DRender=$(usex !3d)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Charts=$(usex !charts)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Concurrent=$(usex !concurrent)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5DataVisualization=$(usex !datavis)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Designer=$(usex !designer)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Gui=$(usex !gui)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Help=$(usex !help)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Location=$(usex !location)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Multimedia=$(usex !multimedia)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5MultimediaWidgets=$(usex !multimedia yes $(usex !widgets))
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Network=$(usex !network)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Positioning=$(usex !positioning)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5PrintSupport=$(usex !printsupport)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Qml=$(usex !qml)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Quick=$(usex !quick)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5QuickControls2=$(usex !quick)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5QuickWidgets=$(usex !quick yes $(usex !widgets))
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Script=yes
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5ScriptTools=yes
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Scxml=$(usex !scxml)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Sensors=$(usex !sensors)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5TextToSpeech=$(usex !speech)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Sql=$(usex !sql)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Svg=$(usex !svg)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Test=$(usex !testlib)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5UiTools=$(usex !designer)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5WebChannel=$(usex !webchannel)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5WebEngine=$(usex !webengine)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5WebEngineCore=$(usex !webengine)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5WebEngineWidgets=$(usex !webengine yes $(usex !widgets))
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5WebSockets=$(usex !websockets)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Widgets=$(usex !widgets)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5X11Extras=$(usex !x11extras)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5Xml=$(usex !xml)
		-DCMAKE_DISABLE_FIND_PACKAGE_Qt5XmlPatterns=$(usex !xmlpatterns)
	)

	pyside2_configure() {
		local mycmakeargs=(
			"${mycmakeargs[@]}"
			-DPYTHON_CONFIG_SUFFIX="-${EPYTHON}"
			-DPYTHON_EXECUTABLE="${PYTHON}"
			-DPYTHON_SITE_PACKAGES="$(python_get_sitedir)"
			-DSHIBOKEN_PYTHON_SHARED_LIBRARY_SUFFIX="-${EPYTHON}"
		)
		cmake_src_configure
	}
	python_foreach_impl pyside2_configure
}

src_compile() {
	python_foreach_impl cmake_src_compile
}

src_test() {
	local -x PYTHONDONTWRITEBYTECODE
	python_foreach_impl virtx cmake_src_test
}

src_install() {
	pyside2_install() {
		cmake_src_install
		python_optimize

		# Uniquify the shiboken2 pkgconfig dependency in the PySide2 pkgconfig
		# file for the current Python target. See also:
		#     https://github.com/leycec/raiagent/issues/73
		sed -i -e 's~^Requires: shiboken2$~&-'${EPYTHON}'~' \
			"${ED}/usr/$(get_libdir)"/pkgconfig/${PN}.pc || die

		# Uniquify the PySide2 pkgconfig file for the current Python target,
		# preserving an unversioned "pyside2.pc" file arbitrarily associated
		# with the last Python target. (See the previously linked issue.)
		cp "${ED}/usr/$(get_libdir)"/pkgconfig/${PN}{,-${EPYTHON}}.pc || die
	}
	python_foreach_impl pyside2_install

	# CMakeLists.txt installs a "PySide2Targets-gentoo.cmake" file forcing
	# downstream consumers (e.g., pyside2-tools) to target one
	# "libpyside2-*.so" library linked to one Python interpreter. See also:
	#     https://bugreports.qt.io/browse/PYSIDE-1053
	#     https://github.com/leycec/raiagent/issues/74
	sed -i -e 's~pyside2-python[[:digit:]]\+\.[[:digit:]]\+~pyside2${PYTHON_CONFIG_SUFFIX}~g' \
		"${ED}/usr/$(get_libdir)"/cmake/PySide2*/PySide2Targets-${CMAKE_BUILD_TYPE,,}.cmake || die
}